Royal Stone
Antolini Black Label · Platinum Stratos · In Los Angeles

Antolini
Platinum Stratos.

The Platinum cut of Tivoli travertine dressed in the Antolini Stratos register — a finely textured finish that emphasises the linear striations of the stone. Historically Antolini’s fabricator-side favourite for kitchens and baths. 2cm. 69″ × 119″. On the floor at South Sepulveda.

2cm

Gauge

69×119

Inches

1 Slab

On the Floor

2cm Antolini Travertino Platinum Black Label Stratos slab, 69 by 119 inches, finely textured Stratos finish on a Platinum vein-cut travertine at the Royal Stone yard in Los Angeles

Antolini Platinum Black Label Stratos — Stratos Finish, in Los Angeles

Antolini Platinum · Stratos

The Plumber’s Stratos.

Quarried in Tivoli, Italy, and finished Stratos through the Antolini Platinum program.

The Antolini Platinum Stratos takes classical Tivoli vein-cut travertine and runs it through the Antolini Stratos process — a finely textured finish that emphasises the linear striations of the stone. Plumbers and fabricators have long favoured Stratos for working kitchens and baths: the surface reads matte, the lines read architectural, and the finish forgives everyday etching.

At 69″ × 119″, the slab sizes for working kitchen islands, primary bath composition, and fireplace surrounds. The Stratos finish delivers the line discipline of a contemporary architecture practice while keeping all the classical warmth of Pink Tivoli. Paired with blackened steel, oak, or terracotta, the slab reads as the room.

The right travertine when the brief is classical with working-friendly finish. Pair with blackened steel, terracotta, oak millwork, lime plaster, and a quieter marble or limestone elsewhere as counterpoint.

One Finish · Stratos

Stratos,
to keep the lines legible.

Antolini Platinum ships at the Stratos register. The Stratos process amplifies the linear striations of the travertine and keeps the surface contemporary, matte, and working-friendly.

The right surface for working kitchens, primary baths, fireplace surrounds, and any application where the slab is meant to live as architecture.

Close view of the Stratos surface on 2cm Antolini Travertino Platinum Black Label — finely textured linear striations at the Royal Stone yard

2cm · 69″ × 119″ · Stratos

Stratos travertine, finely textured, matte

Stratos keeps the Platinum striations legible and the slab contemporary. The slab sits calmly against blackened steel, plaster, and oak — and any patina that develops with use reads as part of the lines rather than wear.

Spec Sheet

Antolini Platinum Stratos.
In detail.

Quarry
Tivoli, Italy
Curator
Antolini · Black Label · Platinum · Stratos program
Stone
Travertine · vein-cut · Platinum · Stratos
Gauge
2cm (3cm by special order)
Cut
Vein-cut across the bedding plane
Fill
Standard fill
Finish
Stratos (honed and leathered by special order)
Application
Working kitchens, primary baths, fireplace surrounds, full-height cladding, dining tables
In stock
Royal Stone · South Sepulveda Boulevard · Los Angeles

Travertine · In the Yard

Other Antolini
travertine on the floor.

Related Antolini Black Label and travertine slabs currently in the Royal Stone yard — leathered Platinum, Cemento, and other premium blocks.

142 slabs

Common Questions

Questions,answered.

What is Antolini Platinum Stratos Travertine?
Platinum Stratos takes the Antolini Black Label Platinum cut of Tivoli vein-cut travertine and runs it through the Antolini Stratos finishing process — a finely textured finish that emphasises the linear striations of the stone. The result is the most respected working-friendly finish on classical Italian travertine.
Is Stratos travertine good for kitchen countertops?
Yes — Stratos is the fabricator-favourite finish for working kitchens. The finely textured surface hides the small etching that develops with use on travertine, and the striations run consistent under everyday wear. Plumbers and stone yards have used Stratos on working kitchens for years.
Where does Platinum Stratos work best?
In the room where the brief is classical with working-friendly finish. A working kitchen island, a primary bath composition, a fireplace surround, a full-height feature wall, a dining table. Pair with blackened steel, terracotta, oak millwork, lime plaster, a quieter marble or limestone elsewhere as counterpoint.
Is Stratos available honed or leathered?
Both by special order. The slab ships at Stratos, calibrated to bring out the linear striations. Honed quiets the lines; leather brings them out softly. Bring drawings and we will lay the options.
How is Stratos different from leathered or honed Platinum?
Same slab family, three different finishes. Stratos amplifies the striations and reads as architecture. Leathered softens the slab with subtle texture. Honed brings the field to a clean matte. Pick the finish that fits the room.
How do I see Platinum Stratos in person?
Royal Stone is at 2303 South Sepulveda Boulevard, West Los Angeles. Designers and private clients are welcome by appointment Monday through Friday. Call (310) 477-3223 and we will pull the slab for you.

Visit the Yard

Walk Platinum Stratos,
by hand.

Stratos is meant to be felt. The slab behaves as material up close. We’d rather pull the slab and walk you through than describe it.

Book a Showroom VisitInquire about Platinum StratosAll Travertine Slabs(310) 477-3223